Home > SUREALONG PRODUCTS > Joist Hanger
Joist Hanger
Materialú║ DX51D-Z275/G300-Z275
Processú║ Stamping/Punching/Bending
Sizeú║ Can be customized
Surfaceú║ Galvanized sheet
Typeú║ Wood connector
Qualityú║ MOQ 2000pcs
Packagingú║ General standard export packing/Accept customized packaging
Joist Hanger

Joist Hangers
1-2mm SGH340 Z275/ G300 Z275 / DX51D-Z275 Galvanized Steel
Joist Hangers are designed for use where a strong, rigid joint is required between members meeting at 90?, e.g. truss/joist to beam, or rafter to bearer connection.
Joist Hanger 47 x 90
Designed for use where gauged timber of 47mm width and up to 150mm deep.
Joist Hanger 47 x 120
Multi-use bracket suitable for gauged 47mm thick timber up to 200mm deep.
Joist Hanger 47 x 190
Used for gauged 47mm thick timber up to 300mm deep.
Joist Hanger 70 x 180
A special size joist hanger designed for gauged 69mm wide timbers.
Joist Hanger 95 x 165
For use on gauged 94mm wide timber or double joists/trusses.
Note: Joist Hangers 52mm wide also available for rough sawn timber.
All of the above Joist Hanger connections should be fixed using nails 30mm x 3.15mm diameter, or Type 17-12g x 35mm Hex Head Screws.

NOTE: Our factory provide custom processing services, can be produced according to customer's drawings. 

Contact us

Tel : +86 108 7338 783

E-mail : info@xunengsun.com

Fax : +86 10 5720 2207

Add : Room S601, Jingbao Building, Anwai street

No 183, Dongcheng District, Beijing, China

Contact Person : James zhou

Message board

SUREALONG ©2018 Group Corporation    Site by:wanmeiweb.com